Single Product

RJ45 Ethernet LAN Wired Network Adapter, Phone Ethernet Adapter,USB Camera Reader Adapter,Compatible with Phone/Pad, Support iOS 12 Before and After(White)

0 out of 5 based on 0 customer ratings
- +
  • Description

    1. ♣【Instant and Fast Ethernet Network】With to RJ45 port you can enjoy fast Ethernet Lan wired Network for your iPhone /ipad. Support 10/100Mbps network, bring faster and more stable network to your phone/Pad.
    2. ♣【Extral USB Camera Adapter】With extra USB port, you can connect USB peripherals like hubs, audio/MIDI interfaces, card readers and more, transferring photos from digital camera to Phone/Pad easily.
    3. ♣【Support cahrging】Surfing the internet and charging at the same time is available. It support 2A charging current.
    4. ♣【Plug and Play】No software/ external power required. Easy to install, just plug and you can enjoy the wonderful life.
    5. ♣ 【System Demand】【WIDELY COMPATIBLE】 Compatible with All of the iOS 12 Before and After. Including Phone、Pad


    Product description

    With the Ethernet USB 3 Camera Adapter, support 10/100Mbps Lan wired Network and it’s easy to transfer photos and videos from your high-resolution digital camera to your Pad/Phone.
    –No software installation was needed. Just plug in the cables: one to your device and one to network cable.
    –With USB reader adapter, you can import the video from your camera/U disk/SD/TF directly into your phone, share your photos and video anytime, anywhere.
    –This adapter supports standard photo formats, including JPEG and RAW, along with SD and HD video formats, including H.264 and MPEG-4.

    How to use:
    — 1. Turn off Wi-Fi on your Phone.
    — 2. Insert your router-connected Ethernet cable into Ethernet port of our adapter
    — 3. Go to”Setting” in your iPad or iPhone and the Ethernet settings will show up on your screen.
    — 4. Click the “Ethernet” to obtain an IP address.
    — 5. Open Safari and check if the connection is working.

    Compatible devices:
    — System required: iOS 10.x (iOS 10.0.1- iOS 10.3.3) + iOS 11.x (11.0.1-11.0.3) — Phone Models: Phone X/Phone 8 Plus/8/7 Plus/7/6s Plus/6s/6Plus/6/SE/5s/5
    — Pad Models: Pad Air 2 /Air/ mini4/mini3/mini2

    1. Make sure your USB device current is less than 100mah, otherwise will can not work normally. Such as current more than 100mah keyboards, USB flash, hub…
    2. This adapter only support photos and videos one-way transfer from your digital camera.
    3. The format of your photo’s must be in a root directory (DCIM) on the flash drive. The photo’s must be in the format (IMG_XXXX.jpg). If this is done, your photo’s will appear on your iPhone and be ready to import.

  • Additional information